Product Description
Cold therapy is about the benefits of the cold—not hauling bags of ice. This chiller keeps your cold plunge consistently cold without the hassle, turning any ice bath into a reliable iceless cold plunge for more frequent and effortless use.
Capable of cooling water into the low 40°F range and even the high 30°F range under ideal conditions, it performs reliably in most ~100-gallon setups. Designed for indoor and outdoor use (non-freezing conditions), it maintains steady temperatures even in challenging environments.
With an average operating cost of just $18–$28 per month, the chiller runs efficiently by cooling only when needed. Continuous cooling helps reduce bacteria buildup, lowers maintenance, and keeps your plunge ready whenever you are—no ice required.
*Please note your setup needs to gravity prime to the pump, the pump is not capable of self priming/suction. Place the chiller within 3' of the drain of your tub, the bottom of the chiller should be at the same or lower height compared to the bottom of your tub – do not elevate the chiller above the tub. An overly long tubing run from the tub drain to the chiller inlet may cause the pump to fail to move enough water.
Product Features
-
3/4 HP high-efficiency chiller
-
7,500 BTU/hr cooling capacity
-
Quiet operation at just 56 dBA
-
Built-in circulation pump
-
Plug-and-play operation
-
10 ft power cord with integrated GFCI protection
-
Rain-proof design*
-
Energy-efficient performance
-
1-year product warranty
-
Proudly made in the USA
*Disconnect and fully drain the chiller when ambient temperatures reach freezing or below.
Product Dimensions
-
Overall Size: 17” W × 15” D × 13” H
-
Weight: 49 lbs
-
Electrical Requirements: 110–120V
-
Power Consumption: 450 watts
-
Current Draw: 3.9 amps
